TEROSON EP 1401 IN 175 ML CARTRIDGE

TEROSON EP 1401 - CARTRIDGE 175 ML

Teroson EP 1401 is a solvent free, slightly expanding, two component adhesive, based on flexibilised and toughened Epoxy Resins.

• 
  
• Cures at room temperature by reaction of component A and B
  
• By heating up both components the chemical reaction will accelerate
  
• Dependent on the geometry and amount of material, the degree of foam can vary
  
• Contains hollow microspheres, by which stiffness, strength and fatigue limit is increased
  

• 
  
• Used as reinforcement e.g. for cavities, metal sheets and structural parts
  

• 
  
• Base : Epoxy Resin
  
• Colour : dark grey
  
• Odour : characteristic
  
• Density : approx. 0,8 g/cm³
  

• 
  
• Base : Amine
  
• Colour : white / light grey
  
• Odour : of amines
  
• Density : approx. 0,6 g/cm³
  
• Mixing ratio A:B by volume : 2:1
  

• 
  
• Colour : gris
  
• Odour : pas d'odeur après polymérisation
  
• Potlife acc. to Bohlin (oscillating)
  
  at 20°C : 90 min
  
  at 30°C : 60 min
  
• Density (cured) : approx. 0,7 g/cm³
  
• Water absorbtion
  
  24 h at 98% HR and 40°C : < 0,5% weigth gain
  
• Compressive strength : 15 to 20 MPa
  
• E-Modulus : 700 MPa
  
• Poisson ratio : 0,22 to 0,26
  
• Volume change
  
  (depending on the curing conditions/ volume / geometry) : 0 to 30 %
  
• In service temperature : -40°C to +90°C